Network Setup (Net) - Christie Matrix StIM-WQ User Manual

Serial Command Reference

Network Setup (NET)

NET
Config/Preference
CONTROL GROUP:
Description
Set or request the network setup for this device.
Subcode
DOMA
ETH0
GATE
HOST
MAC0
PORT
SUB0
Examples:
(NET+ETH0 "192.168.1.35") Set new IP address on the first ethernet controller.
(NET+GATE "192.168.0.1") Set the gateway.
(NET+SUB0 "255.255.255.0") Set the subnet mask on the first ethernet controller.
(NET+HOST "MyHostName") Set the host name.
(NET+DOMA "MyDomainName") Set the domain name.
(NET+ETH0 ?) Get IP address from first controller. (NET+ETH0! "192.168.1.35").
(NET+ETH1 ?) Get IP address from second controller. (NET+ETH1! "192.168.1.36").
(NET+MAC0 ?) Get MAC address from first controller. (NET+MAC0! "00:12:3F:7B:76:B4").
(NET+GATE ?) Get default gateway. (NET+GATE! "192.168.0.1").
(NET+PORT 3002) Set the Port number.
(NET+PORT ?) Get the Port number. (NET+PORT! 3002).
108
Power Down
SUBCLASS:
Description of Use
Set the domain name
Set the IP address for the first ethernet controller.
Set the network gateway.
Set the host name.
Gets the MAC address of the first ethernet controller.
Set the PORT number.
Set the network subnet mask for the first ethernet controller.
Admin
ACCESS LEVEL:
Matrix StIM™ WQ/SIM WQ User Manual
020-100883-01 Rev. 2 (06-2013)