Working With Infrargb; Basic Infrargb Setup - Christie Matrix StIM-WQ User Manual

Working with InfraRGB

The InfraRGB menu allows you to configure the IR inputs and brightness. It allows you to select from
a number of presets that define these proportions for different lighting conditions such as daylight,
moonlight, starlight. These presets can be customized, but have factory default values.

Basic InfraRGB Setup

1. From the Main menu, select InfraRGB.
2. Select Enable InfraRGB.
3. Specify the input to use as the Main
Input and Secondary Input. The
secondary input is used in InfraScene
and Interleaved modes.
4. From the InfraRGB Source
Sequence drop-down menu select
which of the incoming frames are IR
frames.
• Simultaneous RGB+IR (Main): Select when you want to display RGB and IR on the
main input simultaneously.
• InfraScene RGB (Main), IR (Secondary): Select this option to use 2 independent
inputs, RGB on the main input and IR on the secondary.
• Interleaved RGB+IR (Main), RGB+IR (Secondary): Select this option to display both
RGB and IR on the main and secondary inputs. This interleaves both 60Hz inputs so that
the output image will display at 120Hz.
To quickly and easily swap your inputs select Swap Main and Secondary Inputs.
Matrix StIM™ WQ/SIM WQ User Manual
020-100883-01 Rev. 2 (06-2013)
Working with InfraRGB
41