Target Color Space (Tcs) - Christie Matrix StIM-WQ User Manual

Target Color Space (TCS)

TCS
Preference
CONTROL GROUP:
Description
This command is used to set the ArrayLOC target gamut. Several preset color spaces are provided in addition
to four user setting gamuts. The control subcodes provide access to all the presets. Due to the large number of
sub-codes they are not all listed. Instead a simple substitution for the small 'x' is made, according to the
following table:
M
E
S
H
F
1
2
3
4
C
Subcode
SLCT
RDxX
RDxY
GNxX
GNxY
BLxX
BLxY
COPY
CCAP
Matrix StIM™ WQ/SIM WQ User Manual
020-100883-01 Rev. 2 (06-2013)
Power Up
SUBCLASS:
Max drives, read only
EBU, read only
SD Video, read only
HD Video, read only
Factory, read only
User 1
User 2
User 3
User 4
Alias to selected table
Description of Use
Selects the color space preset:
0 = Max drives (M) 5 = User 1 (1)
1 = EBU (E) 6 = User 2 (2)
2 = SD Video (S) 7 = User 3 (3)
3 = HD Video (H) 8 = User 4 (4)
4 = Factory (F)
Adjusts the x coordinate of the red color point (0 - 800 with 3 decimal places)
Adjusts the y coordinate of the red color point (0 - 800 with 3 decimal places)
Adjusts the x coordinate of the green color point (0 - 800 with 3 decimal
places)
Adjusts the y coordinate of the green color point (0 - 800 with 3 decimal
places)
Adjusts the x coordinate of the blue color point (0 - 800 with 3 decimal places)
Adjusts the y coordinate of the blue color point (0 - 800 with 3 decimal places)
Copy gamut settings from preset to current. Value 0-8 for source preset
Read-only field which returns string that gives relationship between projector
capability and the color target.
Serial Command Reference
Operator
ACCESS LEVEL:
119