ABL
SITP
Examples:
(ABL+MODE1) Enable Array Bright/ColorLOC.
(ABL+MODE2) Disable Array Bright/ColorLOC.
(ABL+BRGP 2) Set the brightness group to 2.
(ABL+BRTG 400) Set the brightness target to 400 Lumens.
Auto Color Enable (ACE)
ACE
Preference
CONTROL GROUP:
Description
Automatically select Color Enable based on the control being adjusted. If enabled, this control allows the projector
to automatically change the color enable control. This is an unsaved control, which can only be set when powered
On.
Subcode
<No Subcode >
Examples:
(ACE 0) Disable Auto Color.
(ACE 1) Enable Auto Color.
Matrix StIM™ WQ/SIM WQ User Manual
020-100883-01 Rev. 2 (06-2013)
Synchronize Test Pattern setting amongst array projectors.
0 = Independent
1 = Synchronized
Power Up
SUBCLASS:
Description of Use
Enable/Disable auto color controls.
Serial Command Reference
Operator
:
ACCESS LEVEL
89