Select A Lighting Mode; Adjust Light Mode Brightness Levels - Christie Matrix StIM-WQ User Manual

Select a Lighting Mode

• Day light is 100% brightness of the RGB factor of the video source and 100% brightness
• To change the level of brightness of the lighting modes, see Change Brightness Levels of
1. From the InfraRGB menu, select Enable InfraRGB.
2. Select a lighting mode from the Selected Lighting Mode drop-down list. To change the lighting
mode, go to the Configure Lighting mode menu.

Adjust Light Mode Brightness Levels

To reset the default values select Reset Current Lighting Mode to Default or Reset All
Lighting Modes to Default.
1. From the InfraRGB menu, choose
Configure Lighting Mode.
2. Choose the desired mode from the
Selected Lighting Mode drop-down
list.
3. If you want to base the settings on
another mode, select another mode
from the Copy Lighting Mode From
drop-down list.
4. Use the RGB Brightness and IR Brightness slide bars to change the brightness factors.
Matrix StIM™ WQ/SIM WQ User Manual
020-100883-01 Rev. 2 (06-2013)
of the IR factor.
the Light Modes, on page 3-68.
Working with InfraRGB
47