Christie Matrix StIM-WQ User Manual page 114

Serial Command Reference
IFS
Examples:
(IFS+SLCT 1) Enable InfraRGB.
(IFS+ISLM 4) Select lighting mode preset 4 (moonlight).
(IFS+RGBB ?) Get current RGB lighting brightness (percent * 10).
(IFS+RGBB 250) Set RGB lighting brightness to 25%.
(IFS+IRDB 1000) Set IR lighting brightness to 100%.
(IFS+RGBX 500) Set RGB lighting brightness on User preset to 50%.
(IFS+COPY 5) Copy lighting mode preset 5 (halfmoon) to current.
(IFS+RSTL) Reset current preset to default.
(IFS+RSTA) Reset all presets to default.
102 Matrix StIM™ WQ/SIM WQ User Manual
020-100883-01 Rev. 2 (06-2013)