Infrargb (Ifs) - Christie Matrix StIM-WQ User Manual

InfraRGB (IFS)

IFS
Preference
CONTROL GROUP:
Description
Configures InfraRGB lighting modes which defines the percentage of RGB and IR brightness. It allows selection of
a number of presets that define these proportions for different lighting conditions such as daylight, moonlight,
starlight. These presets may be customized by the user but have factory default values. See
Coefficient (IRC)
on page 103.
For subcodes that are lighting mode specific, substitute the lighting mode code for small x in the subcode:
D Daylight
U Urban
V Semiurban
M Moonlight
H Halfmoon
Q Quartermoon
T Starlight
Cloudy Starlight
C
Subcode
SLCT
ISEQ
ISLM
RGBx
IRDx
COPY
RSTL
RSTA
Matrix StIM™ WQ/SIM WQ User Manual
020-100883-01 Rev. 2 (06-2013)
Power Up
SUBCLASS:
I
X
B
Description of Use
Enable InfraRGB
0 = OFF
1 = ON
InfraRGB Source Sequence identifies which frames are IR.
1 = Simultaneous RGB+IR (Main)
2 = Unused
3 = Unused
4 = InfraScene RGB (Main), IR (Secondary)
5 = Interleaved RGB+IR (Main), RGB+IR (Secondary)
InfraRGB lighting mode preset
1 = daylight
2 = urban
3 = semiurban
4 = moonlight
5 = halfmoon
RGB Brightness (0-1000) percentage with 1 decimal place.
IR Brightness (0-1000) percentage with 1 decimal place.
Copy RGB and IR brightness from preset to current. Value 1-
10 for source preset
Reset current preset to default factory values
Reset all presets to default factory values
Serial Command Reference
Operator
ACCESS LEVEL:
IR Only
User mode
Alias to selected table
6 = quartermoon
7 = starlight
8 = cloudy starlight
9 = IR only
10 = User
InfraRGB
101