Serial Api Commands; Adr-Address; Aim-Auto Image - Christie GS Series Technical Reference

Serial API commands

The GS Series commands can be used to modify product settings.
ADR–Address
Sets or queries the device address.
Commands
Command Description
ADR <value> Sets the projector address to <value>.
Examples
Set the projector address to six:
(ADR 6)
AIM–Auto Image
Reacquires and locks an input signal.
Commands
Command Description
AIM <0 | 1> Reacquires an input signal.
(Write-only)
Examples
Reacquire a signal in normal mode:
(AIM 0)
GS Series Serial API Commands Technical Reference
020-000814-01 Rev. 1 (06-2015)
Values
0 to 9
0 (Default)
Values
0 = Normal mode—Supports all 4:3 input sources.
1 = Wide mode—Supports all 16:9 input sources and
most 4:3 input sources. If a 4;3 input source, such as
1400 x 1050 is not recognized, use Normal mode
10