Ping (Png); Swap (Pps); Serial Port (Prt) - Christie Matrix StIM-WQ User Manual

Serial Command Reference

PING (PNG)

PNG
Configuration
CONTROL GROUP:
Description
This command returns basic projector information to the user which includes the type of device & main software
version. Note that some devices have multiple CPUs each with its own software version. Only the software
version of what is considered to be the master CPU, is returned here. The return parameters are: Type, Major,
Minor, Beta. The beta value is optional meaning it is an engineering build and has not been validated.
NOTE: List of devices: 40 = ACT, 41 = Cinema, 42 = CinemaMini, 43 = Media Block, 44 = Mobius, 
45 = Entero/StIM, 52 = StIM™ WQ.
Subcode
<No Subcode >
Example:
(PNG?) (PNG!41 001 000 234) Indicates 'Cinema' type, software: 1 major, 0 minor, 234 beta.

Swap (PPS)

PPS
CONTROL GROUP: Preference
Description
This control swaps the current main and Inputs. It will swap the Inputs regardless if there are valid signals on
either of the Inputs.
Subcode
<No Subcode >
Example:
(PPS) Swap Inputs.

Serial Port (PRT)

PRT
Preference
CONTROL GROUP:
Description
Gets the current serial port being used, or gets a list of all serial ports available on the device.
Subcode
<No Subcode >
Examples:
(PRT ?) Gets current serial port.
(PRT ?L) Gets list of ports.
112
Power Down
SUBCLASS:
Description of Use
SUBCLASS: Power Up
Description of Use
Power Down
SUBCLASS:
Description of Use
ACCESS LEVEL:
ACCESS LEVEL: Operator
Status
ACCESS LEVEL:
Matrix StIM™ WQ/SIM WQ User Manual
Status
020-100883-01 Rev. 2 (06-2013)