Christie Matrix StIM-WQ User Manual page 79

6. Click Yes from the pop-up window to reboot the projector in Fail Safe mode.
7. The Fail Safe mode displays the current versions of the projector firmware.
8. Click Browse to locate the upgrade file. Double-click the file to select it.
9. Click Upgrade to upload the file to the projector. A progress bar indicates the status of the
upload. After a successful upload, the upgrade starts automatically.
• The top 2 lines of the window display the current action.
• The Upgrading progress bar indicates the status of the current action.
• The upgrading process takes between 15 and 30 minutes.
10. Click Reboot to re-starts the projector in Normal mode. If you are unable to see the WebUI after
the upgrade delete the cache and cookies, and press CTRL+F5.
If the message, Main update failed xxx, see log for details is displayed copy the upgrade log
and send it to Christie technical support.
Matrix StIM™ WQ/SIM WQ User Manual
020-100883-01 Rev. 2 (06-2013)
Upgrade Software
67