Text Parameters; Sample Messages And Their Meaning; Single Projector - Christie Matrix StIM-WQ User Manual

Text Parameters

Most data is simply a numerical value, however some messages also require text. Enclose this text in
double quotation marks, as in "Tilt the Wagon". Use all characters as desired except for the following
special characters shown in the left column below. These special characters require a 2-character
combination. See

Sample Messages and their Meaning

Special Text Characters
to get this....
\
"
(
)
0x0A
Sample Messages and their Meaning

Single Projector

Message Format
(Code Data)
(Code+Subcode Data)
(Code?)
(Code+Subcode?)
(Code!Data)
(Code+Subcode!Data)
($Code Data)
(&Code+Subcode Data Checksum)
Matrix StIM™ WQ/SIM WQ User Manual
020-100883-01 Rev. 2 (06-2013)
enter this....
\\ Backslash
Quote
"
\
\( Left Bracket
\) Right Bracket
\n New line - if the text can be displayed on more than one line,
this will set the line break.
\h## Sends one arbitrary code defined by the 2 hexadecimal digits
##
SET (set gamma function of main image to
222)
SET (set gamma function of secondary input
to 222)
REQUEST (what is current gamma function?)
REQUEST (what is current gamma function
of secondary input?)
REPLY (gamma function is 222)
REPLY (gamma function of secondary image
is 222)
SET AND ACKNOWLEDGE MESSAGE 
(message processed?)
SET WITH CHECKSUM
on page 81.
Description
Function
Serial Communication
Example
(BGF222)
(BGF+SECD222)
(BGF?)
(BGF+SECD?)
(BGF!222)
(BGF+SECD!222)
($BGF222)
(&BGF222 171)
81