Matrix Stim™ Wq/Sim Wq Specifications - Christie Matrix StIM-WQ User Manual

Matrix StIM
Specifications
luminous flux
Image
contrast
uniformity
Display type
technology
native resolution
output frame
rate
Input signal format
input frame rate
Inputs / inputs
outputs,
control and
networking
Optical lens mount
system
illumination
ArrayLOC™
Matrix StIM™ WQ/SIM WQ User Manual
020-100883-01 Rev. 2 (06-2013)
™
WQ/SIM WQ
Matrix StIM-WQ
(P/N: 130-002103-xx)
800 ANSI lumens
10,000:1 dynamic contrast (under LED control)
No mechanical iris required
95% brightness and color uniformity after electronic adjustment
Revolutionary solid state projector using a single TI Darkchip 3™ DMD with a
sold state illumination engine (no color wheel) and sealed optics
2560 x 1600 WQXGA
• 60Hz or 120 Hz
2560 x 1600 WQXGA (VESA RB)
• 60 Hz with single input or 2 x 60 Hz with
dual input
• On-board Ethernet control capabilities
• Additional Ethernet connections for Christie ArrayLOC™ network
• IR/wired remote control as part of optical user kit
• 2 x RS-232 ports and 1 x RS-422 port
• 2 x Dual-link DVI-D
• Mechanical, horizontal and vertical lens shift
• No shutter required
• No iris required – user programmable illumination parameters (eliminates the
need for a mechanical shutter)
• Solid state illumination
• Illumination lifetime greater than 50,000 hours (to 50 % output)
• Full spectrum InfraRGB™
Manages the brightness and color levels of all projectors within an array to a
common level, in real-time with no additional latency
Matrix SIM-WQ
(P/N: 130-003104-xx)
• 60Hz
• 60 Hz with single input
• 1 x Dual-link DVI-D
• RGB
127