Advanced Color Setting (Rgb) - Christie Matrix StIM-WQ User Manual

Serial Command Reference

Advanced Color Setting (RGB)

RGB
Preference
CONTROL GROUP:
Description
Adjusts native projector color space by adjusting the LED power levels. This can be used when ColorLOC is
disabled or if ColorLOC is running in Native or Fixed mode. Care should be exercised when adjusting these
settings as it is possible to overdrive the LEDs and may cause the projector to perform a safety shutdown.
Subcode
CLRM
ROFR
GOFG
BOFB
RGBB
COPY
Examples:
(RGB+ROFR 128) Set Red of Red value.
(RGB+BOFB ?) Get Blue of Blue value.
(RGB+RGBB 500) Set overall brightness to 50%.
(RGB+CLRM 4) Select user preset 2.
(RGB+COPY 2) Copy EBU preset values to current preset.
114
Power Up
SUBCLASS:
Description of Use
Color Mode. Selects:
1 = Native
2 = EBU
3 = User preset 1
Red part of red (0-4095)
Green part of green (0-4095)
Blue part of blue (0-4095)
Controls overall brightness of LEDs (0-1000) percentage with
one decimal place
Copies color mode settings from an existing preset to the
current preset. Values:
1 = Copy from Native
2 = Copy from EBU
3 = Copy from User 1
Operator
ACCESS LEVEL:
4 = User preset 2
5 = User preset 3
6 = User preset 4
4 = Copy from User 2
5 = Copy from User 3
6 = Copy from User 4
Matrix StIM™ WQ/SIM WQ User Manual
020-100883-01 Rev. 2 (06-2013)