Select Lighting Mode; Set Rgb And Ir Lighting Mode - Christie Matrix StIM-WQ User Manual

Working with InfraRGB

Select Lighting Mode

The lighting mode sets the RGB and IR brightness proportions. Choose the lighting mode to set the
RGB and IR brightness for the RGB video source. A factor of 100 is the full brightness of the available
video. Selecting one of the other presets reduces the brightness, as outlined below. To access these
selections select InfraRGB from the Main menu and select from the Selected Lighting Mode drop-
down list.
Preset
Daylight
Urban
Semi–urban
Moonlight
Half–moon
Quarter-moon
Starlight
Cloudy starlight
IR Only
User

Set RGB and IR Lighting Mode

The Configure Lighting Mode menu lets you
set the brightness factors that are used to
calculate the brightness of the RGB and IR
displayed in the various lighting modes.
Default values for each lighting mode are
listed as RGB brightness and IR brightness
factors. To access this menu select
InfraRGB > Configure Lighting Mode
from the Main menu.
42
Default RGB
Brightness
100
80
70
60
30
15
5
2.5
0
100
Default IR
Brightness
100
100
100
100
50
25
15
7.5
100
100
Matrix StIM™ WQ/SIM WQ User Manual
020-100883-01 Rev. 2 (06-2013)