Fan Assist (Fas); Frame Lock Enable (Fle) - Christie Matrix StIM-WQ User Manual

Fan Assist (FAS)

FAS
Saved
CONTROL GROUP:
Description
This control is used to increase fan speed in environments with high ambient temperatures. Default of 0 will use
normal fan speed control which should be sufficient under normal circumstances. To increase fan speed select
larger values.
Subcode
<No Subcode >
Examples:
(FAS 25) Use fan assist.
(FAS 0) Use default fan speed control.

Frame Lock Enable (FLE)

FLE
Saved
CONTROL GROUP:
Description
This controls which input is used to control the output frame timing. When set to Lock, output image frames are
locked to the main input. When set to Lock Secondary, the output is locked to the secondary input (provided one
is present).
Subcode
<No Subcode >
Examples:
(FLE 1) Enables frame lock.
(FLE 2) Enables frame lock.
(FLE ?) Get frame lock enabled status.
Matrix StIM™ WQ/SIM WQ User Manual
020-100883-01 Rev. 2 (06-2013)
Power Down
SUBCLASS:
Description of Use
Power Down
SUBCLASS:
Description of Use
Sets input used to lock output.
Serial Command Reference
Operator
ACCESS LEVEL:
Operator
ACCESS LEVEL:
97