Projector Color Adjustment (Pca) - Christie Matrix StIM-WQ User Manual

Serial Command Reference

Projector Color Adjustment (PCA)

PJH
Unsaved
CONTROL GROUP:
Description
Allows ArrayLOC projector-specific color adjustments ("tweaks") to be set. Subcodes ROxR - BOxW have a small
'x' listed. The small 'x' represents the color table being edited.
Different color tables, denoted by 'x' - replace 'x' with the following: 
S = SD table (Read Only) 
H = HD table (Read Only) 
M = Max drives (Read Only) 
E = Rec 709/EBU (Read Only) 
F = Factory drives (Read Only) 
1 = user table 1 
2 = user table 2 
3 = user table 3 
4 = user table 4 
C = current user table
Subcode
ROxR
GOxR
BOxR
ROxG
GOxG
BOxG
ROxB
GOxB
BOxB
ROxW
GOxW
BOxW
CLRA
RSTL
RSTA
110
Power Down
SUBCLASS:
Description of Use
Adjusts the red part of red. Range 1 - 2000. Expressed with 1
decimal point (Range is 0.1 - 200.0).
Adjusts the green part of red. Range -1000 - 1000. Expressed
with 1 decimal point (Range is -100.0 - 100.0).
Adjusts the blue part of red. Range -1000 - 1000. Expressed
with 1 decimal point (Range is -100.0 - 100.0).
Adjusts the red part of green. Range -1000 - 1000. Expressed
with 1 decimal point (Range is -100.0 - 100.0).
Adjusts the green part of green. Range 1 - 2000. Expressed
with 1 decimal point (Range is 0.1 - 200.0).
Adjusts the blue part of green. Range -1000 - 1000. Expressed
with 1 decimal point (Range is -100.0 - 100.0).
Adjusts the red part of blue. Range -1000 - 1000. Expressed
with 1 decimal point (Range is -100.0 - 100.0).
Adjusts the green part of blue. Range -1000 - 1000. Expressed
with 1 decimal point (Range is -100.0 - 100.0).
Adjusts the blue part of blue. Range 1 - 2000. Expressed with
1 decimal point (Range is 0.1 - 200.0).
Adjusts the red part of white. Range 1 - 2000. Expressed with
1 decimal (Range is 0.1 - 200.0).
Adjusts the green part of white. Range 1 - 2000. Expressed
with 1 decimal (Range is 0.1 - 200.0).
Adjusts the blue part of white. Range 1 - 2000. Expressed with
1 decimal (Range is 0.1 - 200.0).
Clear the current adjustments.
Reset the current adjustment to factory defaults.
Reset all adjustments to factory defaults.
Operator
ACCESS LEVEL:
Matrix StIM™ WQ/SIM WQ User Manual
020-100883-01 Rev. 2 (06-2013)