Basic WebUI Operation
Five primary tabs are located along the top of the WebUI. Each primary tab also has related
secondary tabs, which are located along the bottom of each tab.
Main Tab — General
Under the Main tab, select the General tab at the bottom of the window to view general information
on inputs and projector status, and to activate a test pattern and color enable control.
Main Tab — Status
Under the Main tab, select the Status tab at
the bottom of the window to view the 10
category status lights which indicate the
projector's highest critical state. For details,
click on an individual button. See
Warnings and Errors
The color of the status light indicates that it is in one of the following states:
•
Green = Good
•
Yellow = Warning
•
Red = Error
Matrix StIM™ WQ/SIM WQ User Manual
020-100883-01 Rev. 2 (06-2013)
System
on page 69.
Basic WebUI Operation
29