Power (PWR)
(PWR) Power
Unsaved
CONTROL GROUP:
Description
Change the power state of the projector.
Possible values:
0 - Power-OFF
1 - Power-ON
10 - Projector is cooling down. (Read-only)
11 - Projector is warming up. (Read-only)
Subcode
<No Subcode >
Examples:
(PWR?) Get projector power status.
(PWR1) Turn the LEDs and all electrical power On.
(PWR0) Set the projector to Standby mode.
Matrix StIM™ WQ/SIM WQ User Manual
020-100883-01 Rev. 2 (06-2013)
Power Down
SUBCLASS:
Description of Use
Get or Set the power state of the projector.
Serial Command Reference
Operator
ACCESS LEVEL:
113