Christie Matrix StIM-WQ User Manual page 62

ArrayLOC
A projector with Bright/ColorLOC mode disabled ignores BCLOC changes from the master
projector. If at any point you are working with a slave projector you may not be able to
change some settings as they will be locked (grayed out). To change which projector is the
master check the Synchronize to This Projector option on another projector.
4. RGB and IR Brightness Target fields are typically only enabled on the master unless the
system is not synchronized. See
5. Select Auto Color Enable and Test Pattern Enable. The system (background) color changes to
the target color being adjusted. 
For example:
• Red/green/blue part of red changes the system color to red.
• Red/green/blue part of green changes the system color to green.
• Red/green/blue part of blue changes the system color to blue.
All other menu options change the system color to white as long as Test Pattern Enable is
checked. The color resets automatically when you exit the menu.
50
Configure ArrayLOC on page 55.
Matrix StIM™ WQ/SIM WQ User Manual
020-100883-01 Rev. 2 (06-2013)