Serial API commands
The APS series commands can be used to modify product settings.
PWR-Power
Changes the power state of the product.
Commands
Command
Description
PWR <value>
Turns the projector on or off.
Examples
Turns off the projector:
PWR 0
Turns on the projector:
PWR 1
MENU
Opens the projector menu.
Commands
Command
Description
MENU
Opens the projector menu.
MENU+U/D/L/R/OK
Executes the menu key operation.
APS Series Technical Reference
020-103593-01 Rev. 1 (07-2022)
Copyright
2022 Christie Digital Systems USA, Inc. All rights reserved.
©
If printed, please recycle this document after use.
Value
0 = Turns off the projector
1 = Turns on the projector
Value
—
9