Status Display
Status Display
Projector status is indicated by a single 3-color LED adjacent to a 2-digit status display. Refer to the
table below for a description of the variations that indicate operation status. A solid red LED indicates
a system error and the corresponding error code indicates what the error is.
Status
Rotating
Solid Yellow
PR (Programming Time)
FS (Failsafe mode)
— —
— —
• BO (Booting) when power first applied.
• B1 (Boot phase 1) starting main script
Solid Green
• B2 (Boot phase 2) starting projector code
• B3 (Boot phase 3) about to initialize
SH (Shutter Mode)
Flashing Green
System error. See
Solid Red
blank
Rotating
70
2-Character Display
, static
, moving up and down
connections
Error Codes
Warming up.
The projector is in Failsafe mode.
See
Upgrade Software
Standby mode.
Brief cool down period.
LEDs are disabled to shutter the projector.
Keypad command sent — command received.
on page 71.
Initializing hardware and performing Power
On Self Test.
Description
on page 66.
Matrix StIM™ WQ/SIM WQ User Manual
020-100883-01 Rev. 2 (06-2013)