Adjust Projected White And Primary Colors For The Array - Christie Matrix StIM-WQ User Manual

ArrayLOC
Adjust Projected White and Primary Colors for the
Array
User-defined target color spaces allow color primaries and white points to be adjusted independently.
For example, you can select the target color space User 1, copy the values from the target color
space Factory, leave the color primaries, and adjust only the white point. All the settings for a user-
defined color space are editable.
Use this menu on the master projector to configure the target color space settings. This is the
recommended way to control the color space for the projector and array
projectors in the same ArrayLOC group. These settings are enabled on master projectors only.
1. From the Main menu, select ArrayLOC >
Array Color Target.
2. From the Target Color Space drop-down list,
select a user-defined color space. Once
selected the last saved red/green/blue/xy
values associated with the selection are
displayed.
3. Target Red x/y, Target Green x/y, Target
Blue x/y displays the color values associated
with the selected target color space. Only
values for user defined color spaces (User 1
through 4) can be changed. Changes to these
values update the associated color space
chromaticity. To use another color space as a
starting point, select a source color space from
the Copy Color Space From list. When Target
Color Space is set to Maximum, the values
reflect a color space larger than capable for the
best array color saturation. The values may not
reflect real-world colors
• ColorLOC Status displays ColorLOC warnings and errors.
• Array Capability indicates the current projector capability with respect to the selected color
target and the target white point. The information format is:
• R/G/B: Indicates the percentage achieved of the red, green, and blue target gamut.
• W: Indicates the percentage achieved of the product of the RGB brightness, and the target
brightness.
4. To set the white point for the array:
a. Select a user-defined white point from the Select White Point drop-down list. Changing
this option un checks the Set White to Color Temperature check box and updates the
Target White x/y values and the White Color Temperature.
Target White x/y displays the white x/y values associated with the Select White Point
52
The settings apply to the
.
Matrix StIM™ WQ/SIM WQ User Manual
020-100883-01 Rev. 2 (06-2013)