Time/Date (Tmd); Test Pattern Enable (Tpe) - Christie Matrix StIM-WQ User Manual

Serial Command Reference
TCS
Examples:
(TCS+SLCT 1) Select EBU color gamut as target. 
(TCS+RDCX 290) Set current Target gamut red x point to 0.290.
(TCS+BLEY ?) Return value of EBU preset blue y point.
(TCS+COPY 3) Copy settings from HD Video to current.

Time/Date (TMD)

TMD
Preference
CONTROL GROUP:
Description
Set the date, time or time zone.
Subcode
DATE
TIME
Examples: 
(TMD+TIME "17:50:45") Set new local time. 
(TMD+DATE "2007/02/30") Set the local date. 
(TMD+TIME?) Get local time (TMD+TIME! 17:50:45).

Test Pattern Enable (TPE)

TPE
Preference
CONTROL GROUP:
Description
Automatically select White test pattern based on the control being adjusted. Certain controls that deal with color
settings will enable a white test pattern when entering WebUI menus and disable when exiting the menu. This
control defines whether this happens. There are some situations where the user may not want to automatically
go to a white test pattern when the WebUI menu is selected, for example if they have specific content that they
wish to evaluate.
0 = Disable automatic test patterne
1 = Enable automatic test pattern
Subcode
<No Subcode>
Examples:
(TPE 0) Disable test pattern.
(TPE ?) Report state of test pattern enable.
120
Power Down
SUBCLASS:
Description of Use
Set the date in the form yyyy/mm/dd.
Set the local time in the form hh:mm:ss
NOTE: Time must be set using a 24-hour clock (regardless of
LOC+TIME setting).
Power Up
SUBCLASS:
Description of Use
Admin
ACCESS LEVEL:
Operator
ACCESS LEVEL:
Matrix StIM™ WQ/SIM WQ User Manual
020-100883-01 Rev. 2 (06-2013)