Set Mld Snp Host-Time-Out/Mrouter-Time-Out - Zte ZXR10 5250 Series Command Reference Manual

ZXR10 5250 Series Command Reference
Parameter
add
delete
<1-28>
Example
The following example adds port 9 to VLAN 1 as an mrouter port:
zte(cfg)#set mld sn vlan 1 add mrouter port 9

4.34.7 set mld snp host-time-out/mrouter-time-out

Purpose
This command sets the timeout duration of the mrouter/host port.
Command Mode
Global configuration mode
Syntax
set mld snooping { host-time-out | mrouter-time-out }<30-65535>
Parameter Description
Parameter
<30-65535>
host-time-out
mrouter-time-out
Guidelines
When the aging time is reached, mrouter ports and host ports are deleted from the multicast
group.
Default
The default aging time is 260 seconds.
Example
The following example sets the aging time of the mrouter port to 400 seconds and the
aging time of the host port to 300 seconds:
SJ-20131111172707-003|2013-11-27 (R1.0)
Description
Adds the mrouter port.
Deletes the mrouter port.
Number of a port. Different devices have different port number
ranges. In the syntax, the 5250-28TC device is used as an
example.
Description
Aging time (seconds).
Configures the timeout duration of the host port.
Configures the timeout duration of the mrouter port.
4-514
ZTE Proprietary and Confidential