Set Port Mdix; Set Port Flowcontrol - Zte ZXR10 5250 Series Command Reference Manual

4.2.6 set port mdix

Purpose
This command configures the line sequence identification function.
Command Mode
Global configuration mode
Syntax
set port <portlist> mdix {auto | normal | crossover}
Parameter Description
Parameter
<portlist>
auto
normal
crossover
Guidelines
Only copper-mode ports support the MDIX function.
Default
auto is selected.

4.2.7 set port flowcontrol

Purpose
This command enables or disables the flow control or back pressure function of the
specified ports.
Command Mode
Global configuration mode
Syntax
set port <portlist> flowcontrol {enable | disable}
SJ-20131111172707-003|2013-11-27 (R1.0)
Description
Port list
Automatic line sequence identification
Ordinary line sequence
Crossover line sequence
4-49
Chapter 4 Service Configuration
ZTE Proprietary and Confidential