Clear Ipv6Port; Clear Ipv6Route Default; Show Ipv6Port - Zte ZXR10 5250 Series Command Reference Manual

ZXR10 5250 Series Command Reference

4.18.5 clear ipv6port

Purpose
This command deletes configurations of an IPv6 layer-3 port.
Command Mode
Layer-3 configuration mode
Syntax
clear ipv6port <0>[ipv6address <ipv6Addr/M>]
Parameter Description
Parameter
<0>
<ipv6Addr/M>
Guidelines
To delete configurations of an IPv6 layer-3 port, disable the port first. This command
without the <ipv6Addr/M> parameter is used to delete all configurations of an IPv6 layer-3
port, including the VLAN and ipv6address configurations.

4.18.6 clear ipv6route default

Purpose
This command clears an IPv6 default route.
Command Mode
Layer-3 configuration mode
Syntax
clear ipv6route default

4.18.7 show ipv6port

Purpose
This command shows the IPv6 layer-3 port configurations.
Command Mode
All configuration modes
SJ-20131111172707-003|2013-11-27 (R1.0)
Description
Number of an IPv6 layer-3 port. The current value is 0.
Deletes the specified IPv6 address of an IPv6 layer-3 port.
4-372
ZTE Proprietary and Confidential