Show Radius - Zte ZXR10 5250 Series Command Reference Manual

Parameter
<isp-name>
<A.B.C.D>

4.20.47 show radius

Purpose
This command shows the RADIUS configuration.
Command Mode
All configuration modes
Syntax
show radius [ispname <ispname>]
Parameter
Parameter
<ispname>
Example
The following example shows all ISP configurations:
zte(cfg-nas)#show radius
NAS name
Retransmit times
Retransmit timeout: 3
Keep time
Isp Delimiter
Default Isp
Vendor id
Client
DefaultIsp
FullAccounts: Yes
Authentication servers
----------------------
10.40.89.78
Accounting servers
----------------------
10.40.89.78
SJ-20131111172707-003|2013-11-27 (R1.0)
Description
Deletes by ISP name.
Deletes by ISP server's IP address.
Description
ISP name. The command without this parameter shows all ISP
configurations.
: name-of-nas
: 3
: 3600
: @
: test
: 3902
: 0.0.0.0 IspName
: Yes Description :
SharedSecret: radius-interactive
Auth-port
---------
1812
Acct-port
---------
1813
4-407
Chapter 4 Service Configuration
: test
ZTE Proprietary and Confidential