Zte ZXR10 5250 Series Command Reference Manual page 50

ZXR10 5250 Series Command Reference
Syntax
tftp <A.B.C.D> upload <local-file-name>[<remote-file-name>]
tftp <A.B.C.D> download <remote-file-name>[<local-file-name>]
Parameter Description
Parameter
<A.B.C.D>
download
upload
<local-file-name>
<remote-file-name>
Guidelines
l
If the <local-file-name> and <remote-file-name> parameters are the same, the <remote-
file-name> parameter can be omitted.
l
The Trivial File Transfer Protocol (TFTP) command requires the configuration ofthe
layer-3 interface of the switch. For layer-3 interface configuration, refer to the IPv4
Layer-3 Configuration and IPv6 Layer-3 Configuration sections in this manual.
SJ-20131111172707-003|2013-11-27 (R1.0)
Description
Server IP address.
Downloads a file from the server to the local Flash memory.
Uploads a local file to the server.
Name of the file in the local Flash memory. The parameter can be
in any of the following formats:
1. If the parameter includes the absolute path, such as
/cfg/startrun.dat (device format), the full path name of
the file is /cfg/startrun.dat.
2. If the parameter includes the relative path, such as
cfg/startrun.dat, the full path name of the file is
/cfg/startrun.dat (assuming the current path of the local
Flash memory is "/").
3. If the parameter does not include any path, such
as startrun.dat, the full path name of the file is
/cfg/startrun.dat (assuming the current path of the local
Flash memory is /cfg/).
Name of the file on the server. The parameter can be in any of the
following formats:
1. If the parameter includes a path, such as \cfg\startru
n.dat (windows format), the full path name of the file is
D:\svn_5250\prj\cfg\startrun.dat (assuming the
path of the TFTP server is D:\svn_5250\prj\).
2. If the parameter does not include any path, such
as startrun.dat, the full path name of the file is
D:\svn_5250\prj\startrun.dat (assuming the path of
the TFTP server is D:\svn_5250\prj\).
3-6
ZTE Proprietary and Confidential