Show Trunk Vlan; Show Lacp - Zte ZXR10 5250 Series Command Reference Manual

ZXR10 5250 Series Command Reference

4.9.10 show trunk vlan

Purpose
This command shows VLANs to which the specified trunks belong.
Command Mode
All configuration modes
Syntax
show trunk <trunklist> vlan
Parameter Description
Parameter
<trunklist>
Example
The following example shows the VLAN to which trunk 1 belongs:
zte(cfg)#show trunk 1 vlan
TrunkId
Tagged in vlan
Untagged in vlan : 1

4.9.11 show lacp

Purpose
This command shows LACP global configurations.
Command Mode
All configuration modes
Syntax
show lacp
Example
The following example shows LACP global configurations:
zte(cfg)#show lacp
Lacp is enabled.
Lacp priority is 1.
Load-balance is based on L2 hash mode.
SJ-20131111172707-003|2013-11-27 (R1.0)
Description
Trunk list
: 1
:
4-128
ZTE Proprietary and Confidential