Show Rmon; Show Statistics - Zte ZXR10 5250 Series Command Reference Manual

The following example sets the data source of the history group whose index is 10 to userx:
zte(cfg-snmp)#set history 10 datasource userx
The following example sets the buckerRequest of the history group whose index is 10 to
100:
zte(cfg-snmp)#set history 10 bucketRequest 100
The following example sets the owner name of the history group whose index is 10 to tom:
zte(cfg-snmp)#set event 10 owner tom
The following example sets the time interval of the history group whose index is 10 to 100
seconds:
zte(cfg-snmp)#set history 10 interval 100
The following example sets the status of the history group whose index is 10 to invalid:
zte(cfg-snmp)#set history 10 status invalid

5.5.6 show rmon

Purpose
This command shows the RMON global configuration.
Command Mode
All configuration modes
Syntax
show rmon
Example
zte(cfg-snmp)#show rmon
Rmon is enabled.

5.5.7 show statistics

Purpose
This command shows the configuration of a statistics group or all statistics groups.
Command Mode
All configuration modes
SJ-20131111172707-003|2013-11-27 (R1.0)
Chapter 5 Management Configuration
5-35
ZTE Proprietary and Confidential