Chapter 1 Safety Instructions; Safety Instructions; Safety Signs - Zte ZXR10 5250 Series Command Reference Manual

Chapter 1

Safety Instructions

Table of Contents
Safety Instructions......................................................................................................1-1

Safety Signs ...............................................................................................................1-1

1.1 Safety Instructions
Only duly trained and qualified personnel can install, operate, and maintain the equipment.
During equipment installation, operation, and maintenance, local safety specifications
and relevant operation Guidelines must be obeyed. Failure to comply may result in
human injury or equipment damage. Safety precautions mentioned in this manual are
only supplementary to the local safety specifications.
Running the debug commands on the equipment may affect the performance of the
equipment and cause serious consequences. It is not recommended to run the debug
commands when the network equipment operates properly.
ZTE Corporation bears no responsibility for consequences resulting from violation of
general specifications for safety operations or of safety rules for design, production, and
use of the equipment.
1.2 Safety Signs
Safety information that users should pay attention to during device installation, operation,
and maintenance are explained in the following formats:
Warning!
Indicates a potentially hazardous situation. Failure to comply can result in serious injury,
equipment damage, or interruption of major services.
Caution!
Indicates a potentially hazardous situation. Failure to comply can result in moderate injury,
equipment damage, or interruption of minor services.
SJ-20131111172707-003|2013-11-27 (R1.0)
1-1
ZTE Proprietary and Confidential