Zte ZXR10 5250 Series Command Reference Manual page 244

ZXR10 5250 Series Command Reference
Example
1. The following example shows the detailed information about all channel groups:
zte(cfg-nas)#show iptv channel-group
MaxChannelGroupNum:256
CurChannelGroupNum:1
HisChannelGroupNum:1
Id
----- ----------
100
The information displayed is described as follows:
Parameter
MaxChannelGroupNum
CurChannelGroupNum
HisChannelGroupNum
Id
Name
StartIp
EndIp/Mask
MVlan
2. The following example shows the detailed information about the channel group named
as lsj:
zte(cfg-nas)#show iptv channel-group name lsj
ChannelGroupId
GroupStartAddress
GroupEndAddress
CurOrdUserNum
CurPrvUserNum
CurUserNum
CdrEnable
-------------viewprofile info-------------
ViewProfileName
MaxPrvCount
MaxPrvInter
BlackoutInter
The information displayed is described as follows:
Parameter
ChannelGroupId
GroupStartAddress
SJ-20131111172707-003|2013-11-27 (R1.0)
Name StartIp
------------- ------------- ------
LSJ 225.0.1.1
:100
:225.0.1.1
:225.0.1.10
:0
:0
:0
:enabled
:DEFVAL.PRF
:3
:120
:60
EndIp/Mask
225.0.1.10
Description
Maximum number of channel groups that can be configured
Number of currently configured channel groups
Number of channel groups that were configured before
Channel group ID
Channel group name
Start multicast group IP address
End multicast group IP address/mask
VLAN to which the channel group belongs to
MvlanId
HisOrdUserNum
HisPrvUserNum
HisUserNum
ViewProfileId
Description
Channel group ID
Start multicast group IP address
4-186
MVlan
4000
:4000
:0
:0
:0
:0
ZTE Proprietary and Confidential