Set User Local Admin-Password - Zte ZXR10 5250 Series Command Reference Manual

ZXR10 5250 Series Command Reference
Parameter
tacacs-plus
local+tacacs-plus
tacacs-plus+local
Guidelines
By default, no authentication is needed.

4.1.22 set user local admin-password

Purpose
This command sets the management password of a local user.
Command Mode
Global configuration mode
Syntax
set user local <name> admin-password [<string>]
Parameter Description
Parameter
<name>
<string>
Guidelines
If admin-password is directly entered without any parameter, it indicates that the
management password is set to null.
Example
The following example sets the management password of a local user with the name of
username to ok:
zte(cfg)#set user local username admin admin-password ok
SJ-20131111172707-003|2013-11-27 (R1.0)
Description
Sets management authentication to
Local authentication is performed first. If local authentication fails,
TACACS+ authentication is performed.
TACACS+ authentication is performed first. If TACACS+
authentication fails, local authentication is performed.
Description
User name
Management password
4-12
TACACS+ authentication.
ZTE Proprietary and Confidential