Set Zesr Ctrl-Vlan Major-Level Role; Set Zesr Ctrl-Vlan Level Seg Role Master/Transit - Zte ZXR10 5250 Series Command Reference Manual

4.29.3 set zesr ctrl-vlan major-level role

Purpose
This command sets a major level node.
Command Mode
Global configuration mode
Syntax
set zesr ctrl-vlan <cvlan id> major-level role {master | transit | zess-master|zess-transit }{pri
mary-port <port1>| primary-trunk <trunkId>}{secondary-port <port2>| secondary-trunk
<trunkId>}
Parameter Description
Parameter
<cvlan id>
master
transit
zess-master
zess-transit
primary-port <port1>
primary-trunk <trunkId>
secondary-port <port2>
secondary-trunk <trunkId>
Example
The following example sets port 1/2 as the primary port and 1/4 as the secondary port on
a master node in a ZESR control VLAN:
zte(cfg)#set zesr ctrl-vlan 10 major-level role mas primary-port 1/2 secondary-port 1/4

4.29.4 set zesr ctrl-vlan level seg role master/transit

Purpose
This command sets a node in a segment.
Command Mode
Global configuration mode
SJ-20131111172707-003|2013-11-27 (R1.0)
Description
Control VLAN ID in a ZESR domain, range: 1–4094.
Sets a node as a master node.
Sets a node as a transit node.
Sets a node as a zess-master node.
Sets a node as a zess-transit node.
Primary port number. The range varies with the device type.
Primary trunk ID, range: 1–15.
Secondary port number. The range varies with the device type.
Secondary trunk ID, range: 1–15.
4-479
Chapter 4 Service Configuration
ZTE Proprietary and Confidential