Iptv Port Channel-Group - Zte ZXR10 5250 Series Command Reference Manual

ZXR10 5250 Series Command Reference
zte(cfg-nas)#iptv port 1 package id-list 0,1

4.11.35 iptv port channel-group

Purpose
This command assigns channel group access rights for port users.
Command Mode
NAS configuration mode
Syntax
iptv port <portlist>[vlan <1-4094>] channel-group {name <channel-group-name>| id-list <ch
annel-group-list>}{deny | order | preview | query}
Parameters
Parameter
<portlist>
vlan <1-4094>
name <channel-group-name>
id-list <channel-group-list>
deny
order
preview
query
Guidelines
The configuration of channel-group is supported only when the channel mode is selected
in control-mode.
Example
The following example sets the channel group access rights to allow for port 2:
zte(cfg-nas)#iptv port 2 vlan 2 channel-group name chname0 order
SJ-20131111172707-003|2013-11-27 (R1.0)
Description
Port list.
Assigns channel group access rights within a VLAN for ports. If
this parameter is not set, channel group access rights within all
VLANs is assigned to the ports.
Channel group name.
Channel group list.
The channel group access rights is deny.
The channel group access rights is order.
The channel group access rights is preview.
The channel group access rights is query.
4-176
ZTE Proprietary and Confidential