Set Stp Trunk Enable/Disable - Zte ZXR10 5250 Series Command Reference Manual

Parameter Description
Parameter
<10-65535>
Guidelines
After port recovery, implement the BPDU protection function immediately. If a BPDU
message is received, the ports are disconnected.
Default
The interval is 100 seconds.
Example
The following example sets the interval for BPDU protection recovery to 1000:
zte(cfg)#set stp bpdu-interval 1000

4.12.9 set stp trunk enable/disable

Purpose
This command enables or disables the STP for trunks.
Command Mode
Global configuration mode
Syntax
set stp trunk <trunklist>{enable | disable}
Parameter Description
Parameter
<trunklist>
enable
disable
Default
The STP is enabled.
SJ-20131111172707-003|2013-11-27 (R1.0)
Description
Interval. The units is seconds.
Description
Trunk list.
Enables the STP.
Disables the STP.
4-199
Chapter 4 Service Configuration
ZTE Proprietary and Confidential