ZXR10 8900 Series Command Manual (FW Volume)
Parameter
Description
Example
Command
Function
Command Format
Example
Command
Function
Command Format
Parameter
Description
Example
Command
Function
152
Confidential and Proprietary Information of ZTE CORPORATION
Parameter
<number>
To set the number of probe packets sent to server in virtual server
to 5, execute the following command:
# probe-package set 5 package set is 5
probe-package show
This command is used to show the number of probe packets sent
from device to server in virtual server.
probe-package show
To show 5 as the number of probe packets sent to server in virtual
server, execute the following command:
# probe-package show package set is 5
probe-server-time
This set of commands is used to set wait time for switchover be-
tween virtual servers.
probe-server-time set
This command is used to set wait time for switchover between
virtual servers.
probe-server-time set<number>
Parameter
<number>
To set wait time for switchover between virtual servers to 20 sec-
onds, execute the following command:
# probe-server-time set 20 server update time is 20
probe-server-time show
This command is used to show wait time for switchover between
virtual servers.
Description
This is one number, in range of 1-8, 1 by
default.
Description
This is one number, in seconds, in range of
0-30, 3 by default.