Set Sleep-Mode - Zte ZXR10 5250 Series Command Reference Manual

Syntax
set port statistics mode {ingress | egress | both}
Parameter Description
Parameter
ingress
egress
both
Guidelines
This command affects counting statistics of some ports, for example, messages of 64 bytes
and messages of 65 to 127 bytes. It does not affect the statistics for message receiving
and sending.
Default
ingress is selected.

4.2.13 set sleep-mode

Purpose
This command enables or disables the port sleep mode.
Command Mode
Global configuration mode
Syntax
set sleep-mode {enable | disable}
Parameter Description
Parameter
enable
disable
Default
The port sleep mode is disabled.
SJ-20131111172707-003|2013-11-27 (R1.0)
Description
Takes statistics of the ingress direction.
Takes statistics of the egress direction.
Takes statistics of both directions.
Description
Enables the port sleep mode.
Disables the port sleep mode.
4-53
Chapter 4 Service Configuration
ZTE Proprietary and Confidential