Set Qos Traffic-Shaping Fe-Port Data-Rate; Set Qos Traffic-Shaping Fe-Port Queue Data-Rate - Zte ZXR10 5250 Series Command Reference Manual

ZXR10 5250 Series Command Reference

4.14.24 set qos traffic-shaping fe-port data-rate

Purpose
This command sets the egress shaping limit for an FE port.
Command Mode
Global configuration mode
Syntax
set qos traffic-shaping fe-port <1-24>{data-rate <32-100000> burst-size <1-4094>| disable}
Parameter Description
Parameter
<1-24>
data-rate
<32-100000>
burst-size
<1-4094>
disable
Default
The egress shaping function is disabled.
Example
The following example sets the egress shaping limit to 1000 kbps and burst size to 32
KBytes for port 2:
zte(cfg)#set qos

4.14.25 set qos traffic-shaping fe-port queue data-rate

Purpose
This command sets the egress shaping rate for an FE port based on queue.
Command Mode
Global configuration mode
SJ-20131111172707-003|2013-11-27 (R1.0)
Description
Number of an FE port. Different devices have different port
number ranges. In the syntax, the 5250-28TC device is used as
an example.
Egress shaping rate.
Shaping rate limit. The granularity is 32 Kbps.
Burst rate.
Burst rate value. The granularity is 4 KB.
Disables the egress shaping function.
traffic-shaping fe-port 2 data-rate 1000 burst-size 8
4-320
ZTE Proprietary and Confidential