Udld Port Reset; Show Udld - Zte ZXR10 5250 Series Command Reference Manual

4.36.6 udld port reset

Purpose
This command manually recovers the capability of ports to create links.
Command Mode
Global configuration mode
Syntax
udld port <portlist> reset
Parameter Description
Parameter
<portlist>
Guidelines
The function of this command is the same as that of the recovery command.

4.36.7 show udld

Purpose
This command shows UDLD configurations.
Command Mode
All configuration modes
Syntax
show udld
Example
The following example shows UDLD configurations:
zte(cfg)#show udld
Udld configuration:
Flags: AdminCfg-Administrative configuration, RecovCfg-Recovery configuration
ForceChk-Force check configuration, FCT-Force check time(s)
MTI-Message time interval(s), RTI-Recovery time interval(s)
Id-PortId, Nor-Normal mode, Aggr-Aggressive mode, (s)-Unit second
Id AdminCfg
-------------------------------------------------------------------------------
SJ-20131111172707-003|2013-11-27 (R1.0)
Description
Port list
ForceChk FCT Mode
4-537
Chapter 4 Service Configuration
MTI RecovCfg RTI State
ZTE Proprietary and Confidential
Neighbor