4.3.12 set poe port power-exceed
Purpose
This command sets the action taken when the power of a PoE port exceeds the limit.
Command Mode
Global configuration mode
Syntax
set poe port <portlist> power-exceed {shutdown | warning}
Parameter Description
Parameter
<portlist>
Example
The following example sets the action taken when the power of PoE port 1/1 exceeds the
limit to shutdown:
zte(cfg)#set poe port 1/1 power-exceed shutdowm
4.3.13 set poe port protect-time
Purpose
This command sets the recovery time when the power of a PoE port exceeds the limit.
Command Mode
Global configuration mode
Syntax
set poe port <portlist> protect-time <time>
Parameter Description
Parameter
<portlist>
<time>
Example
The following example sets the recovery time when the power of PoE port 1/1 exceeds the
limit to 5 minutes:
SJ-20131111172707-003|2013-11-27 (R1.0)
Description
Port list. If this parameter is not specified, it means all ports.
Description
Port list. If this parameter is not specified, it means all ports.
Recovery time, unit: minutes.
4-71
Chapter 4 Service Configuration
ZTE Proprietary and Confidential