Telnet; Set Telnet Server Enable/Disable; Show Telnet - Zte ZXR10 5250 Series Command Reference Manual

5.8 Telnet

5.8.1 set telnet server enable/disable

Purpose
This command enables or disables the Telnet server function.
Command Mode
Global configuration mode
Syntax
set telnet server {enable | disable}
Parameter Description
Parameter
enable
disable
Default
The Telnet server function is enabled.

5.8.2 show telnet

Purpose
This command shows Telnet configurations and status.
Command Mode
All configuration modes
Syntax
show telnet
Example
The following example shows Telnet configurations and status:
zte(cfg)#show telnet
Telnet server is enable
Telnet server is listening on port 23
SJ-20131111172707-003|2013-11-27 (R1.0)
Chapter 5 Management Configuration
Description
Enables the Telnet server function.
Disables the Telnet server function.
5-67
ZTE Proprietary and Confidential