Show Aaa-Control Port - Zte ZXR10 5250 Series Command Reference Manual

ZXR10 5250 Series Command Reference
Command Mode
NAS configuration mode
Syntax
aaa-control port <portlist> keepalive client-ip {enable | disable}
Parameter Description
Parameter
<portlist>
enable
disable
Default
The function of getting users' IP addresses is disabled.
Example
The following example enables ports 1, 3, and 5 to get users' IP addresses:
zte(cfg-nas)#aaa-control port 1,3,5 keepalive client-ip enable

4.20.30 show aaa-control port

Purpose
This command shows the aaa configuration of the specified ports.
Command Mode
All configuration modes
Syntax
show aaa-control port <portlist>
Parameter Description
Parameter
<portlist>
Example
The following example shows the aaa configuration of port 1:
zte(cfg-nas)#show aaa-control port 1
SJ-20131111172707-003|2013-11-27 (R1.0)
Description
Port list.
Enables the function of getting users' IP addresses.
Disables the function of getting users' IP addresses.
Description
Port list. The command without this parameter means to show the
aaa configuration of all ports.
4-396
ZTE Proprietary and Confidential