Show Port Statistics; Show Port Utilization - Zte ZXR10 5250 Series Command Reference Manual

ZXR10 5250 Series Command Reference
PortEnable
Duplex
DefaultVlanId
Multicastfilter: default
SpeedAdvertise : maxSpeed
AcceptFrame
ProtocolVlan
PortVlanJump
PortStatus:
PortClass
Duplex
UpTime
RecentDownTime : 0 years

4.2.17 show port statistics

Purpose
This command shows port statistics.
Command Mode
All configuration modes
Syntax
show port <portlist> statistics [1min_unit | 5min_unit]
Parameter Description
Parameter
<portlist>
1min_unit
5min_unit
Guidelines
The command without the 1min_unit and 5min_unit parameters indicates that all
statistics of the desired ports will be displayed.

4.2.18 show port utilization

Purpose
This command shows the bandwidth utilization of ports.
SJ-20131111172707-003|2013-11-27 (R1.0)
: enabled MediaType
: auto Speed
: 100 FlowControl
Security
Mdix
: all Jumbo
: disabled EgressTPID
: disabled
: 802.3 Link
: full Speed
: 0 years 0 days 0 hours 19 minutes 14 seconds
0 days 0 hours
4-56
: 1000BaseT
: auto
: disabled
: disabled
: auto
: disabled
: 0x8100
: up
: 1000Mbps
0 minutes 2 seconds
Description
Port list
Traffic statistics in 1 minute
Traffic statistics in 5 minutes
ZTE Proprietary and Confidential