Egress-Acl Hybrid Rule Type-Ipv6-Any - Zte ZXR10 5250 Series Command Reference Manual

Guidelines
IP rule can match IPv4–specified protocol field, source-specified IP, any source IP,
destination-specified IP, any destination IP, DSCP field, IP fragment field, cos field,
VLAN field, source-specified MAC, any source MAC, destination-specified MAC and any
destination MAC.

4.13.68 egress-acl hybrid rule type-ipv6-any

Purpose
This command sets the rule that the hybrid egress ACL matches IPv6 packets.
Command Mode
Hybrid egress ACL configuration mode
Syntax
rule <1-500>{permit | deny} ipv6 any {<source-ipv6addr><sipv6-mask>| any}[{<destination-ipv
6addr><dipv6-mask>| any}[<vlan-id>]]
Parameter Description
Parameter
<1-500>
permit
deny
ipv6 any
<source-ipv6addr>
<sipv6-mask>
any (first)
<destination-ipv6addr>
<dipv6-mask>
any (second)
SJ-20131111172707-003|2013-11-27 (R1.0)
Description
Rule number.
If the condition matches, access is permitted.
If the condition matches, access is denied.
This rule is only valid for IPv6 packet. Other packets ignore this
rule.
IPv6 Source network or host of the transmitted package. The
standard IPv6 address format is used, such as abcd:EF12::123 4
Source mask and used for source. It is expressed by an integer.
The range is 1 to 128.
Matches all source IPv6 addresses, source and source mask are
all 0s.
The destination network or host address of the transmitted IPv6
packet. The standard IPv6 address format is used, such as
abcd:EF12::123 4
Destination mask. It is used for destination and represented by
one integer. The value range is 1 to 128.
Matches all destination IPv6 addresses. The destination and
destination mask are all 0s.
4-281
Chapter 4 Service Configuration
ZTE Proprietary and Confidential