Ingress-Acl Hybrid Rule Type-Arp - Zte ZXR10 5250 Series Command Reference Manual

ZXR10 5250 Series Command Reference
Parameter
<vlan-id>
<vlan-mask>
<source-mac>
<smac-mask>
any (third)
<dest-mac>
<dmac-mask>
any (fourth)
Guidelines
The UDP rule can match source-specified IPs, any source IPs, UDP source port numbers,
destination-specified IPs, any destination IPs, DSCP fields, IP fragment fields, cos fields,
VLAN fields, source-specified MACs, any source MACs, destination-specified MACs, and
any destination MACs.

4.13.30 ingress-acl hybrid rule type-arp

Purpose
This command sets the rule that the hybrid ingress ACL matches the ARP packet.
Command Mode
Hybrid ingress ACL configuration mode
Syntax
rule <1-500>{permit | deny} arp {<sender-ipaddr><sip-mask>| any}{<target-ipaddr><tip-mask
>| any}[cos <0-7>][<vlan-id>[<vlan-mask>]][<source-mac><smac-mask>| any][<dest-mac><dm
ac-mask>| any]
Parameter Description
Parameter
<1-500>
SJ-20131111172707-003|2013-11-27 (R1.0)
Description
This rule is only valid for messages with the specified VLAN ID.
Ignore this rule for other messages. The rule of VLAN ID is 1
to 4094.
This rule is only valid for messages with the specified VLAN ID.
Ignore this rule for other messages. The rule of VLAN ID is 1
to 4094.
Source MAC address of the transmitted packet.
Source MAC mask.
The any keyword is used as the abbreviation of the source MAC
address 00.00.00.00.00.00 and the mask 00.00.00.00.00.00.
Destination MAC address of the transmitted packet.
Destination MAC address of the transmitted packet.
The any keyword is used as the abbreviation of the destination
MAC address 00.00.00.00.00.00 and the mask 00.00.00.00.00.00.
Description
Rule number.
4-240
ZTE Proprietary and Confidential