Set Igmp Snooping Last-Member-Query - Zte ZXR10 5250 Series Command Reference Manual

ZXR10 5250 Series Command Reference
Command Mode
Global configuration mode
Syntax
set igmp snooping response-interval <10-250>
Parameter Description
Parameter
<10-250>
Guidelines
When the host receives a query message, it will send a report message after a period of
time to avoid instant shocks that intense response may cause to the router.
Default
The waiting time is 100, that is, 10 seconds.
Example
The following example sets the waiting time to 15 seconds:
zte(cfg)#set igmp snooping response-interval 150

4.10.14 set igmp snooping last-member-query

Purpose
This command sets the querying circle of the last member.
Command Mode
Global configuration mode
Syntax
set igmp snooping last-member-query <10-250>
Parameter Description
Parameter
<10-250>
Default
The default value is 10, that is, 1 second.
SJ-20131111172707-003|2013-11-27 (R1.0)
Description
Waiting time. The unit is 100 milliseconds.
Description
Querying circle of the last member. The unit is 100 milliseconds.
4-140
ZTE Proprietary and Confidential