Configuring Address Resource; Address Resource Configuration Overview; Setting Host Resource - Zte ZXR10 8900 Series User Manual

ZXR10 8900 Series User Manual (FW Volume)
28 Confidential and Proprietary Information of ZTE CORPORATION
Note:
The following special characters cannot be present in resource
name: space, "'", """, "\", ";", """, "$", "&", "@", "%", "|", "~",
"<", ">", "#", "+", "!", "=", "^", "?", "'" (the key under "~").
ZXR10 8900 Series SwitchIt is available to rename resource on FW
service card.
Configuring Address
Resource
Address Resource Configuration
Overview
Configuration of address resource is the most basic one in resource
management. It needs to select different address resources when
defining access control rules and address translation rules. User
can set address resources of various types, such as host resource,
address range resource and subnet resource, and meanwhile can
define address group to add all these address resources into ad-
dress group.
For setting of various address resources and address group, please
refer to the following sections.
User can perform management and configuration to above re-
sources in DEFINE module of ZXR10 8900 Series Switch FW card.
To access this command module, execute the following command:
#define
To exit this command module, execute the following command:
#end

Setting Host Resource

1. Adding host.
Command
ZXR10_FW.define#host add <name
<string1>>[ipaddr <string2>][m
acaddr <macaddress>][session
<number1>][halfsession <number2>]
Function
This adds one host.