Show Policy - Zte ZXR10 5250 Series Command Reference Manual

ZXR10 5250 Series Command Reference
Parameter Description
Parameter
<0-383>

4.14.68 show policy

Purpose
This command shows various binding configurations of the specified flow.
Command Mode
All configuration modes
Syntax
show policy [mirror | redirect | statistics | policing [<0-383>]| vlan-remark | remark | harddr
op]
Parameters
Parameter
mirror
redirect
statistics
policing <0-383>
vlan-remark
remark
harddrop
Guidelines
The command without any parameters shows all the binding configurations.
Example
The following example shows all the binding configurations:
zte(cfg)#show policy
Total qos policy rule number: 1
---------------------------------------------------------------
set policy policing in acl 1 rule 1 policer 10
SJ-20131111172707-003|2013-11-27 (R1.0)
Description
Flow policer ID
Description
Shows the binding configuration of flow mirroring.
Shows the binding configuration of flow redirection.
Shows the binding configuration of flow statistics.
Shows the binding configuration of a flow policer or all flow
policers. 0 to 255 are used for ingress ACLs. 256 to 383 are used
for egress ACLs.
Shows the binding configuration of VLAN tag modification.
Shows the binding configuration of UP/DSCP modification.
Shows the binding configuration of harddrop.
4-350
ZTE Proprietary and Confidential