Show Arp-Inspection - Zte ZXR10 5250 Series Command Reference Manual

ZXR10 5250 Series Command Reference
Default
The number of ARP messages that a port processes in each second is not limited.
Example
The following example sets the maximum number of ARP messages that port 8 processes
in each second to 20:
zte(cfg)#set arp-inspection port 8 untrust
zte(cfg)#set arp-inspection port 8 limit 20

4.19.5 show arp-inspection

Purpose
This command shows the configuration of the DAI function.
Command Mode
All configuration modes
Syntax
show arp-inspection
Example
The following example shows the configuration of the DAI function:
zte(cfg)#show arp-inspection
Enabled validation: ip,dst-mac,src-mac
Enabled vlanlist
PortId
------
1
2
3
5
6
7
8
9
10
11
12
13
14
15
SJ-20131111172707-003|2013-11-27 (R1.0)
: 1-4094
TrustType Limit(pps)
--------- ----------
Trust -
Untrust -
Trust -
Trust -
Trust -
Trust -
Untrust 20
Trust -
Trust -
Trust -
Trust -
Trust -
Trust -
Trust -
4-378
ZTE Proprietary and Confidential